Charging The Battery - CAMBRIDGE CSW-10AT-B Installation And Operation Manual

1.3 Charging The Battery

bAt LO
When the battery voltage falls to 6.5VDC, as described previously,
will be displayed continuously. The battery needs to be charged at this time.
With the on/off switch in the OFF position, connect one end of the power
adapter to a 110VAC outlet. Next connect the other end of the adapter to the
power jack on the rear of the meter. The charge indicating led will be orange
while the battery is being charged and turned off when the battery is fully
charged. Turn the on/off switch to the ON postion and the meter will be fully
operational as the battery is being charged.
CHARGE INDICATING LED
Manual P/N 5999-1011-02
CAMBRIDGE SCALE WORKS, INC. 5