Figure 1.4-2 Led Configuration Via The Settings \ Output Config \ Led Config Menu - Siemens 7SR21 Manual

7SR21 & 7SR22 Argus Applications Guide
2) In the OUTPUT CONFIG\LED CONFIG menu in the Settings tab, to assign the required LED as a
particular colour, either red or green, type the LED number in the appropriate row. To assign the
required LED as a yellow colour, type the LED number in both red and green rows.
NB: If a LED number is not assigned that particular LED will not illuminate.

Figure 1.4-2 LED configuration via the Settings \ OUTPUT CONFIG \ LED CONFIG menu

©2010 Siemens Protection Devices Limited Chapter 7 Page 9 of 39