Brocade Communications Systems ServerIron ADX 1000 Installation Manual page 35

SSL Upgrade Kit contents
Table 1
TABLE 1
Description
SSL Expansion Module
4-40 nuts with Phillips drive
4-40 x 3/8 phillips drive pan head screws
FIGURE 20
1 SSL Expansion module 2 14-40 nuts with Phillips drive 3 4-40 x 3/8 Phillips drive pan head screw
Installing the SSL Expansion Module onto a ServerIron ADX Management Module
See
Complete the following steps to attach the SSL Expansion Module onto a ServerIron ADX
Management module.
1. Locate and unpack the ServerIron ADX SSL Upgrade Kit. See
2. Place the Management module on a table or flat surface.
3. Line up the posts on the Management module with the holes on the SSL Expansion module
4. Push down firmly on the SSL Expansion module between the two posts to fully mate the
5. Attach the nuts to the posts and secure firmly using a Phillips screwdriver.
Brocade ServerIron ADX Installation Guide
53-1002405-01
lists the items that are included in your ServerIron ADX SSL Upgrade Kit.
ServerIron ADX SSL Upgrade Kit contents
ServerIron ADX SSL Upgrade Kit contents
2
Table 1 for a list of the SSL Upgrade Kit components.
list and illustration of the kit components.
and place the module on the posts.
connector to the Management module.
Quantity
1
2
6
1
3
Installing ServerIron ADX
Table 1 for a and Figure 20 for a
2
25