Wps - Push Button Setup - D-Link DCS-2230L User Manual

Section 2: Installation

WPS - Push Button Setup

If your router supports WPS, you can use the WPS button on the camera to easily create a secure wireless connection to your
network.
To create a WPS connection:
Step 1
Press and hold the WPS button for approximately 5-6 seconds. The blue WPS
status LED above the button will blink.
Step 2
Within 60 seconds press the WPS button on your router. On some routers, you
may need to log in to the web interface and click on an on-screen button to
activate the WPS feature. If you are not sure where the WPS button is on your
WPS Button
router, please refer to your router's User Manual.
The DCS-2230L will automatically create a wireless connection to your router.
While connecting, the status LED will flash. When the connection process is
complete, the status LED will turn solid.
D-Link DCS-2230L User Manual 21