Yamaha YFM700RE Owner's Manual page 112

1. Coolant drain bolt
2. Gasket
4. Remove the radiator cap.
8
1
1. Radiator cap
5. Remove the coolant reservoir cap.
6. Disconnect the coolant reservoir hose on the
1
2
1. Coolant reservoir cap
2. Coolant reservoir hose
7. After draining the coolant, thoroughly flush the
8. Install the coolant drain bolt and its new gas-
Tightening torque:
8-20
coolant reservoir side, and then drain the cool-
ant from the coolant reservoir.
cooling system with clean tap water.
ket, and then tighten the bolt to the specified
torque.
Coolant drain bolt:
11 Nm (1.1 m·kgf, 8.0 ft·lbf)
1
2