Page 1
LPG 100E USERS INSTRUCTIONS IT IS IMPORTANT THAT THE CASE OF THIS APPLIANCE IS NOT REMOVED FOR ANY REASON OTHER THAN FOR SERVICING BY A QUALIFIED SERVICE ENGINEER. THE APPLIANCE MUST NOT BE OPERATED WITHOUT THE CASING CORRECTLY FITTED AND FORMING AN ADEQUATE SEAL.
Page 2
Check that the gas, electricity and water are all turned OTHER CONTROLS on at the main supply. A Potterton Electronic Programmer or other type of clock 2. Check that the time control, if fitted, is in an ‘ON’ period. may have been fitted in your system, together with room and/or cylinder thermostats.
Page 3
4. Overheat Limit Thermostat The boiler is fitted with a safety thermostat to protect against overheating of the water. Should the boiler fail to light, allow it to cool and press the reset button. Access to the button is through a hole in the underside of the controls cover, see illustration on front page.
Page 4
It is important to include details of your installer annually for safety and to have routine maintenance. This (if known) and to return the completed form to the Potterton should be carried out by a CORGI Registered Registration Department.