Brake Light Switches; Adjusting The Clutch Lever Free Play - Yamaha YFM700RSBH Owner's Manual

hold the adjusting bolt with a wrench so
that it does not turn together with the lock-
nut.
[ECB00522]
Tightening torque:
Locknut (rear brake caliper):
16 N·m (1.6 kgf·m, 12 lb·ft)
EWB02091
WARNING
Operating with improperly serviced or adjust-
ed brakes could cause the brakes to malfunc-
tion, resulting
performance. This could increase the chance
of a collision or accident. After adjusting the
parking brake free play, block the rear of the
8
ATV off the ground and spin the rear wheels.
Check to make sure there is no brake drag. If
brake drag is noticed, perform the adjustment
again.
EBU24744

Brake light switches

The brake light, which is activated by the brake
pedal and brake lever, should come on just before
braking takes effect.
in reduced braking
The brake light switch for the brake pedal can be
adjusted as follows, but the front brake light
switch should be adjusted by a Yamaha dealer.
Turn the rear brake light switch adjusting nut while
holding the brake light switch in place. To make
the brake light come on earlier, turn the adjusting
nut in direction (a). To make the brake light come
on later, turn the adjusting nut in direction (b).
1. Rear brake light switch
2. Rear brake light switch adjusting nut
EBU29752

Adjusting the clutch lever free play

The clutch lever free play must be checked and, if
necessary, adjusted at the intervals specified in
the periodic maintenance and lubrication chart.
8-36
1
2
(a) (b)