Hardware Overview; Connectors And Buttons - Axis M3106-LVE User Manual

AXIS M3106-LVE Network Camera

Hardware Overview

Hardware Overview
1
Status LED indicator
2
Part number (P/N) & Serial number (S/N)
3
Network connector (PoE)
4
SD memory card slot
5
Control button
6
Pan lock screw
7
Tilt lock screw

Connectors and Buttons

For technical specifications, see page 63.
Network Connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NOTICE NO NO TICE TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's
instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .
SD card slot
NOTICE TICE
NO NO TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power or
unmount the SD card from the Axis product's webpages before removal.
This product supports microSD/microSDHC/microSDXC cards (not included).
For SD card recommendations, see www.axis.com
7