Advertisement
1
Removing Parts from the Crate
No Parts Required
Procedure
Remove the tires and the parts for the ROPS from the
shipping crate.
2
Checking the Tire Pressure
No Parts Required
Procedure
Pressure: 13 psi (90 kPa)
Note: The front caster wheel is a semi-pneumatic tire
and does not need to be checked.
Check the air pressure in the drive tires.
Figure 1
3
Raising the Machine Up and
Installing the Drive Wheels
Parts needed for this procedure:
2
Rear wheels
Procedure
1. Remove the screws holding the right angle retaining
plate to the crate.
2. Raise the back of the machine up and support it with
jack-stands.
3. Remove the wheel nuts from both sides of the
vehicle and remove the right angle retaining plate.
Discard the screws and retaining plate.
2
Figure 2
Figure 3
Advertisement
