Error Codes - Panasonic KY-B626SL Operating & Installation Instructions Manual

Error Codes

Heating can be resumed after the causes of the following errors are eliminated.
Indication
The following errors can be cleared by pressing the key of the applicable cooking
zone.
Indication
Possible cause
■ There is water or objects on or around the
control panel.
■ Key is held longer than required.
Cookware not detected
■ No pan placed on the cooking zone.
■ The pan has been removed.
■ The pan is not in the correct position. (See
pages 13-14)
■ An incompatible pan is used. (See pages 15-
16)
Small object on the cooking zone
■ Small metal objects (e.g. cutlery, utensils) are
placed on the cooking zone.
If the above conditions are not rectified,
the display and the main power will turn off.
Possible cause
The intake or exhaust vent are blocked (See page
44-45)
Remove any blockages.
Empty pan on the cooking zone
An empty pan has been heated.
■
When deep/shallow frying, oil was preheated
■
by selecting the power level instead of Deep/
Shallow Frying Mode.
Use Deep/Shallow Frying Mode for
heating up a large amount of oil.
■ Incompatible cookware is used for Deep/
Shallow Frying Mode. (See pages 15-16)
■ The pan is not in the correct position. (See
pages 13-14)
■ More than 800 g of oil has been heated up.
■ Ingredients were added while preheating.
37
EN