Replacing The Grass Deflector - Toro 78922 Operator's Manual

With 48in or 52in turbo force side discharge mower
Hide thumbs Also See for 78922:
Table of Contents

Advertisement

1. Clutch pulley
2. Mower belt
3. Spring loaded idler pulley
4. Ratchet
7. Remove and retain the hardware on both sides of the
deck as shown in Figure 99.
Figure 98
5. Square hole in the idler
arm for the ratchet
6. Idler grease zerk
7. Belt guide
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the rear deck lift attachment shoulder bolt and nut.
4. Remove the front deck lift attachment shoulder bolt and nut.
8. Raise the deck struts and secure them in the up
position. Slide the deck out to the right side of the
machine.

Replacing the Grass Deflector

WARNING
An uncovered discharge opening could allow the
lawn mower to throw objects in the operator's or
bystander's direction and result in serious injury.
Also, contact with the blade could occur.
Never operate the lawn mower unless you install a
cover plate, a mulch plate, grass deflector or bagger.
1. Remove the locknut, bolt, spring and spacer holding
the deflector to the pivot brackets (Figure 100).
Remove damaged or worn grass deflector.
60
Figure 99

Advertisement

Table of Contents
loading

This manual is also suitable for:

78924Z master g3

Table of Contents