Checking The Engine Oil Level; Starting The Engine - Toro 74380 TimeCutter Z4200 Operator's Manual

4
2
1
1. Gas tank body
2. Gas tank neck

Checking the Engine Oil Level

Before you start the engine and use the machine, check
the oil level in the engine crankcase; refer to Checking
the Oil Level in Engine Maintenance , page 23.

Starting the Engine

1. Sit down on the seat and move the motion controls
outward to the park position.
2. Disengage the blades by moving the blade control
switch to Off (Figure 8).
1 1
1. Control panel
3. Move the throttle lever to Choke before starting a
cold engine (Figure 10).
Note: A warm or hot engine may not require
choking.
3
G005302
Figure 7
3. Fill to here, approximately
4. Gas tank opening
2 2
G005056
Figure 8
2. Blade control switch—Off
position
2 2
2 2
1. Control panel
2. Throttle/choke
lever—choke position
3. Choke
4. Turn the ignition key to Start to energize the starter.
When the engine starts, release the key (Figure 10).
Important: Do not engage the starter for more
than 10 seconds at a time. If the engine fails
to start, allow a 60 second cool-down period
between attempts. Failure to follow these
instructions can burn out the starter motor.
14
1 1
3 3
G005057
4 4
5 5
6 6
Figure 9
4. Fast
5. Continuous variable
setting
6. Slow