Switch On; On, Standby Or Off; Keys On Tv (For 4100, 4200, 4101, 4111, 4201, 6300, 630) Series; Sleep Timer - Philips 4101 series User Manual

4

Switch on

4.1

On, Standby or Off

For 4100, 4200, 4101, 4111, 4201 series
Before you switch on the TV, make sure you plugged
in the mains power in the POWER connector on the
back of the TV.
To put the TV in Standby when the indicator light is
off, press the small joystick key on the back of the TV.
The indicator will light up.
With the TV in standby, press
control to switch the TV on.
Switch to standby
To switch the TV to Standby, press
control.
Switch Off
To switch the TV Off, press the joystick key. The
indicator light goes off.
The TV is still connected to the mains power but
consumes very little energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
4.2
Keys on TV (For 4100, 4200,
4101, 4111, 4201, 6300, 630)
series
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu...
1. With the TV switched on, press the joystick key on
the back of the TV to bring up the basic menu.
2. Press left or right to
select  Volume,  Channel or  Sources.
3. Press up or down to adjust the volume or tune to
the next or previous channel. Press up or down to go
through the list of sources, including the tuner
selection.
4. The menu will disappear automatically.
To switch the TV off, select  and press the joystick

on the remote

on the remote
key.
4.3

Sleep timer

With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
To set the sleep timer . . .
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > Sleep
timer.
With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off.You can
always switch off your TV earlier or reset the time
during the countdown.
3. Press  , repeatedly if necessary, to close the
menu.
4.4

Switch Off Timer

If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer ...
1. Press  and select Setup and press OK.
2. Select TV settings > General settings > Switch
off timer.
3. Press  (up) or  (down) to adjust the
value. The value 0 deactivates the automatic switch
off.
4. Press  , repeatedly if necessary, to close the
menu.
14