Download Print this page

Wolf Garten UV 30 EV plus Instruction Manual page 12

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
Safety instructions
Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine
as described here. Keep the instructions in a safe place for future use.
Meaning of the symbols
ttention!
Read Instruction manual before use!
ttention!
- Sharp knives - before performing a maintenance
work or if the cable is da-maged pull out the plug.
Keep the supply flexible cord away from the cutting
blade!
General Notes
• Due to physical danger of the user the aeriator must not be used:
- s motorised hoe
- For the levelling of ground elevations like mole hills
• Never let children or other persons who are not familiar with the
operation of the tool use the aerator. Children under 16 years of age
are not permitted to use the tool.
• Only use the aeriator on dry grass.
• Only work in daylight or appropriate artificial lightning.
Before aeriating
lways wear suitable clothing; never loose clothing which could be
caught by the cutting tool. Wear suitable footwear! lso protect your
legs (e. g. with long trousers) and your hands (gloves).
ttach the deflector and collecting device respectively included in
the delivery. Make sure it is attached securely. The use without or
with damaged devices is not permitted.
• Remove all foreign particles like stones, wood pieces, bones or
similar from the lawn prior to aeriating.
• Check the operating tool for
a) tight fit of the attachment parts
b) damage or heavy wear and tear - When replacing observe instal-
lation instructions
• Examine line installed on the outside of the tool and the connection
cable for damage and wear and tear (brittleness). Only use when
no damages can be found.
• Repairs to the cable may only be carried out by a specialist.
• Check the grassbox more often for wear and tear.
• Before adjusting or cleaning of the tool or before checking whether
the connection line has been knotted up or damaged switch off the
tool and pull plug out of the socket.
Cable
• Please work with safety cables. For the connection only lines which
are not lighter than rubber hose lines H0 7 RN-F with a minimum
diameter of 3 x 1,5 mm
2
• They must be waterproofmobile decvices that are used outdoors
must be connected via a residual current circuit breaker.
• Use a leakage-protective system (RCD) with a leakage current of
no more than 30 m .
ttach connection cable to traction relief. Make sure that in does
not rub against edges, pointed or sharp objects. Do not squeeze
cable through door or window gaps.
• Switching devices must not be removed or bridged (e. g. tying of
switching lever to guide spar).
12
must be used.
Keep bystanders away!
Keep the supply flexible cord away from the cutting
blade!
Starting up
• Only switch on motor when your feet are at a safe distance from the
cutting tools.
• Do not tilt the aeriator when operating the switch unless absolutely
necessary. If it is necessary tilt the aeriator as little as possible and
always in such a way that the aeriator remains between you and the
blade.
During aeriation
• Warning, Danger! Cutting tool is lagging!
dhere to the safety distance given by the guidance spars.
• Only switch on motor when your feet are at a safe distance from the
cutting tools.
lways make sure that you have a safe footing, especially on
slopes. Never run, always walk slowly.
• Do not use the aeriator on steep slopes.
• Keep cable away from operating tool when aeriating.
lways move aeriator horizontally to the slope, never up and
down.
• Switch off aeriator when tilting or transporting.
• Never use the aeriator when protective devices or housing parts are
damaged or missing.
• Before lifting or removing the aeriator switch off motor an wait until
the operating tools have come to a complete standstill.
• Before removing the grassbox or adjusting of the operating height
switch off motor and wait for the complete standstill of the operating
tools.
• Replace worn or damaged blades as a complete set. Observe
installation instructions. For safety reasons always use original
spare parts.
• Maintenance and cleaning procedures on the aeriator as well as
removing the protective devices may only be carried out when the
engine is switched off.
• Never store the aeriator in damp surroundings or near open flame.
• Should have run over an object with the aeriator it should be exam-
ined by a specialist (see list of repair shops) for safety reasons.
• If the connection cable is damaged during use it must be dis-
connected immediately. Do not touch the cable until it is discon-
nected.
Disposal
• Do not dispose of electrical equipment in domestic
waste. Recycle equipment, accessories and packaging
in an environment-friendly manner
.

Advertisement

loading

This manual is also suitable for:

Uv 32 evUv 34 e