NOTE: When in the Portrait View Mode, you may experience performance
degradation in graphic-intensive applications (3D Gaming and etc.).
Adjusting the Rotation Display Settings of Your System
After you have rotated your monitor, you need to complete the procedure below to
adjust the Rotation Display Settings of your System.
NOTE: If you are using the monitor with a non-Dell computer, you need to go the
graphics driver website or your computer manufacturer website for information on
rotating the 'contents' on your display.
To adjust the Rotation Display Settings:
Right-click on the desktop and click Properties.
Select the Settings tab and click Advanced.
If you have an ATI graphics card, select the Rotation tab and set the preferred
If you have an nVidia graphics card, click the nVidia tab, in the left-hand column
select NVRotate, and then select the preferred rotation.
If you have an Intel
Properties, select the Rotation tab, and then set the preferred rotation.
NOTE: If you do not see the rotation option or it is not working correctly, go to
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
To connect your monitor to the computer:
Turn off your computer.
2 Connect the HDMI/DP-mDP/USB cable from your monitor to
the computer. (Vertically extend and tilt the monitor completely to rotate it for
cable connection. See
3 Switch on your monitor.
4 Select the correct input source at Monitor OSD Menu and turn on your
NOTE: U2417H default setting is DP 1.2. DP 1.1 Graphic card may not display
normally. Please refer to
connection to the
Setting Up the Monitor
graphics card, select the Intel graphics tab, click Graphic
and download the latest driver for your graphics card.
"product specific problems – No image when using DP
PC" to change default setting.