SETTING UP CHANNELS
You can use the TV's Channels menu to:
•
Select a Channel Source
VIZIO
•
Find Channels
CHANNELS
•
Perform a Partial Channel Scan
Channels not searched
•
Manually Add Channels
Channel Source
•
Select channels to skip
Find Channel
Partial Channel Search
Add Analog Channel
Skip Channel
Analog Audio
Digital Language
Selecting a Channel Source
Select the type of tuner input you will be using. You can select either
Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.
1. From the CHANNELS menu, highlight Channel Source and
press OK. The CHANNEL SOURCE menu displays.
2. Highlight Antenna or Cable and press OK. Press EXIT.
Wide
Zoom
Normal
Panoramic
Cable
Scanning for Channels
The TV may need to scan for channels before it can display programs
Exit
2D
3D
and their associated information. A channel scan is required for
free over-the-air channels (using an antenna) and cable channels
Stereo
from an out-of-the-wall connection (without a cable box). Moving
ABC
English
the TV to an area with different channels requires the TV to scan for
channels again.
Input
Wide
CC
To perform an Auto Channel Scan:
1. From the CHANNELS menu,
Sleep
highlight Find Channels, and
Picture
Audio
Timer
press OK. The auto channel scan
begins.
2. Wait until the channel scan is
Network
Settings
Help
100% complete. Highlight Done
and press OK.
3. Press the EXIT button on the
remote.
If the channel scan is cancelled,
the channels that were already
discovered are retained. A new
channel scan will clear all channels.
Adding New Channels
Occasionally, you may need to add a new range of channels or
add a new analog channel. You can do this by using the Partial
Channel Search and Add Analog Channel options. This is quicker
than scanning all possible channels.
To add a range of new channels:
1. From the CHANNELS menu, highlight Partial Channel Search,
and press OK. The PARTIAL CHANNEL SEARCH menu is
displayed.
2. Highlight Scan Mode and select the type of channel you are
adding: Analog, Digital, or Analog/Digital.
3. Highlight From Channel and enter the channel where you
want to begin the scan. (Use the Left Arrow button to
backspace. Use the Number Pad on the remote to enter the
VIZIO
channel.)
4. Highlight To Channel and enter the channel where you want
VIZIO
Wide
Zoom
to end the scan. (Use the Left Arrow button to backspace. Use
FIND CHANNELS
the Number Pad on the remote to enter the channel.)
Channels Found
Wide
Zoom
Digital: 0
5. Highlight Start and press OK. The partial channel search
Exit
2D
Analog: 19
begins.
18%
Complete
6. Wait until the partial channel search is 100% complete.
Exit
2D
Cancel
Highlight Done and press OK.
Input
Wide
7. Press the EXIT button on the remote.
Input
Wide
Sleep
Picture
Timer
Sleep
Picture
Cancel the channel scan.
Timer
Network
Settings
Network
Settings
Normal
Panoramic
Normal
Panoramic
3D
3D
ABC
ABC
CC
CC
Audio
Audio
Help
Help
2
24