Adjusting The Color Tuner Settings - Vizio D24-D1 User Manual

Adjusting the Color Tuner Settings

The Color Tuner settings allow you to adjust the HSB color and 11
point white balance, turn color channels off for testing, and display
color bar, flat, and ramp test patterns.
The Color Tuner, 11 Point White Balance, and test
patterns allow technicians to manually calibrate the TV.
Calibration requires specialized training, an input with
precisely set colors, and a specialized light meter.
To adjust the HSB color settings:
1. From the COLOR CALIBRATION menu, use the Arrow buttons
to highlight Color Tuner, and then press OK. The Color Tuner
menu is displayed.
Color Tuner
Red Green Blue Cyan
Hue 0 0 0 0
Saturation -1 5 -4 0
Brightness -24 0 -22 0
Offset 0 0 0
Gain 0 0 0
2. Use the Arrow buttons on the remote to highlight the Hue,
Saturation, Brightness, Offset, or Gain of the color you wish
to adjust. Press the OK button.
3. Use the Left/Right Arrow buttons to adjust the value. When
you are finished press the OK button to save the setting.
4. When you are finished adjusting the color tuner settings, press
the EXIT button.
To turn color channels off and on:
1. From the COLOR CALIBRATION menu, use the Arrow buttons
to highlight Color Tuner, and then press OK. The Color Tuner
menu is displayed.
Red
Hue 0
Saturation -1
Brightness -24
Offset 0
Gain 0
2. Use the Arrow buttons on the remote to highlight Red, Green,
or Blue.
3. Press the OK button to turn the color channel off or on. An X
Magenta Yellow
appears over a color channel that has been turned off.
25 -14
-2 0
4. Use the Arrow buttons to highlight another color channel to
0 0
turn off or on. Only two color channels can be turned off at the
same time.
5. When you are finished with the color channels, press the EXIT
button.
Color Tuner
Green Blue Cyan Magenta Yellow
0 0 0 25 -14
5 -4 0 -2 0
0 -22 0 0 0
0 0
0 0
To adjust the 11 Point White Balance settings:
1. From the Color Tuner menu, use the Arrow buttons to
highlight Color Tuner, and then press the Left/Right Arrow
buttons until the 11 Point White Balance menu is displayed.
11 Point White Balance
Gain Red Green
5% 0 0
2. Use the Arrow buttons on the remote to highlight the Gain
and Color values you wish to adjust. Press the OK button and
use the Left/Right Arrow buttons to adjust the value. When
you are finished, press the OK button to save the setting.
3. When you are finished, press the EXIT button.
2
Blue
0
17