Table of Contents
Advertisement
FW1179 User's Manual
3. FW1179 Installation and Basic Setup
3.1. Before Installation
Read carefully User's Manual.
Check User's Network (IP Address, Network Mask and default gateway)
Secure IP address for FW1179.
3.2. Factory Default Settings
The following table shows the factory default condition. Please refer to this when you need to change
the values on admin menu.
Note:
Factory default Admin ID and Password are all lower case letters. You can change the
password with Capital letters.
3.3. Installing FW1179
Following steps are the physical installation process for FW1179.
1.
Fix the FW1179 in place
2.
Connect the FW1179 to the Internet cable through the LAN port.
3.
Connect the power supply of FW1179.
After that, you need to follow the steps below.
Network Configuration: Refer to "IP Installer User's Manual"
Camera Configuration: Refer to "FlexWATCH Admin Menu User's Manual"
Service Configuration: Refer to "FlexWATCH Admin Menu User's Manual"
M4066-01
Admin ID
Admin password
IP address
Network mask
Gateway
Wireless LAN (Option)
Table 5 : Factory Default
Factory Default
root
root
10.20.30.40
255.255.255.0
10.20.30.1
Disabled
11
Seyeon Tech Co., Ltd
Advertisement
Table of Contents
