Appendix; Help And Advice; Technical Specifications - PURE Evoke D2 Mio Owner's Manual

Appendix

Help and advice

I can't see Evoke in the list of available Bluetooth devices on my mobile device
This may be because your Evoke Bluetooth visibility setting is set to 'Off'. To make Evoke visible on your
mobile device, change Evoke's Bluetooth visibility setting to 'On' (see page 12).
My mobile device is prompting me for a passcode when I try to pair with Evoke
Some legacy Bluetooth devices may prompt you to enter a passcode when trying to pair with Evoke. If this
occurs, enter the code '0000'.

Technical specifications

Radio
Frequencies
Bluetooth
Audio
Input connectors
Output connectors
Mains power supply
ChargePAK
Power consumption
Dimensions
Approvals
16
Digital and FM radio
DAB/DAB+/DMB-R/Parametric stereo decode up to 256 kbps
FM radio 87.5-108 MHz
A2DP support
1.6W RMS. Full-range 3" drive unit.
5.5V DC power adaptor socket (230V supplied), Mini USB connector for
product updates, 3.5mm Line-in for auxiliary devices
3.5mm stereo headphone socket.
Adapter: Input: AC 100-240V, 50/60Hz, 0.18A, Output DC 5.5V
Main unit: DC 5.5V
Pure ChargePAK B1 rechargeable battery pack (available separately)
Standby: 0.8W, Active: 1.7W
115 mm wide x 180 mm high x 120 mm deep
CE marked. Compliant with the EMC and Low Voltage Directives (2004/108/
EC and 2006/95/EC) ETSI EN 300 401 compliant.
Australian C-Tick N1600 and Electrical Safety.
, 1.0A
, 1.0A;