Page 2
If you have any questions about your warranty you can call us toll free: 1800 988 268 What’s covered by this warranty? • Pure agrees to refund, repair or replace, at your election, without charge to you, any part found to be defective during the warranty period.
Page 3
Evoke D2 Mio with Bluetooth Thank you for choosing Evoke D2 Mio with Bluetooth. This manual will help you get your product up and running in no time and explains how to get the best out of all its great features. If you need any further assistance,...
Page 4
1. Read the instructions for ChargePAK use in this document. 2. Only use your ChargePAK with original Pure products. 3. Store ChargePAK in a cool, dry place at normal room temperature. Remove from devices that will be stored unused for extended periods.
Contents 10 Setting the alarm and sleep Introduction timer Front panel controls 10 Setting the alarm Display 11 Cancelling a sounding alarm Rear panel 11 Snoozing a sounding alarm Getting started 11 Disabling an alarm Quick set up 11 Setting the sleep timer 11 Setting the kitchen timer Using your Evoke 12 Options and settings...
Introduction Front panel controls Standby: On/standby switch (mains powered) or on/ off switch (ChargePAK powered). Source: Press to switch between Digital radio, FM radio, Auxiliary input and Bluetooth. Menu: Press to access setup options. Volume: Turn to adjust volume. Push to mute and un-mute.
Rear panel You will need to remove the rear cover to see the ChargePAK compatment on the rear panel of Evoke (see page 18 for more information). 5.5V DC input connection for supplied mains adapter. 3.5mm stereo headphone socket. 3.5mm auxiliary input connection for an iPod, MP3 player, etc.
Getting started Quick set up Note: If you have a ChargePAK B1 rechargeable battery (sold separately) fit it now before plugging Evoke in. See page 17 for more information. • Unclip the aerial and fully extend it (steps A and B). •...
Using your Evoke Selecting digital radio BBC Radio 2 BBC Radio 2 Press Source to switch to digital radio. the latest news the latest news Changing digital stations 1. Turn the Select dial to the station you want to listen to. Station list 2.
Storing and selecting presets Store up to 10 digital and 10 FM radio stations for quick access. To quick-store a station to a preset button (1–3) BBC Radio 2 the latest news Tune to the digital or FM radio station you want to store. Press and hold one of the numbered preset buttons (1–3) for two seconds to save the current station as a preset.
Using Bluetooth If your phone or tablet is capable of storing audio files, you can use Bluetooth to stream any music stored on your phone or tablet to Evoke. Note: Adding a Bluetooth device varies on different mobile devices. See your mobile device manual for specific information.
Setting the alarm and sleep timer The alarm in Evoke switches the radio on (if in standby) and tunes to a digital or FM radio station or sounds a tone. Note: The alarm function does not work when Evoke is being powered by the ChargePAK B1. Setting the alarm DRFM 1.
Cancelling a sounding alarm To cancel a sounding tone alarm, press either the 3, 4+, Menu or Source button, or push the Select dial. Note: If you have set up your alarm to tune into a radio station, you can only cancel the alarm by pressing the Standby ( ) button.
2. Turn and press the Select dial to ‘Settings’. 3. Turn and press the Select dial to ‘Version’. Update Contact Pure technical support (http://support.pure.com) for more information on how to update Evoke to the latest software version. Bluetooth settings You can use the Bluetooth menu to make Evoke visible or invisible to other Bluetooth devices: 1.
Digital radio settings Autotune You can use the autotune function to automatically scan for new digital radio stations and remove inactive ones. Note: Autotune is only available when you have selected ‘Digital’ as the radio source. To carry out an autotune: 1.
Display settings Changing the backlight brightness level 1. Press Menu and turn and press the Select dial to choose ‘Display’. 2. Turn and press the Select dial to choose ‘Backlight’. 3. Turn and press the Select dial to adjust the brightness level when Evoke’s display is ‘Active‘ or in ‘Standby’. 4.
Clock settings Setting the time and date The time and date on Evoke are automatically set by the FM or digital radio signal. If the time/date does not update automatically, you can manually set it using this option. Note: Any time or date updates received by an FM or a digital broadcast will override manual settings, if clock synchronization is enabled (see the following page for more information).
Adapter: Input: AC 100-240V, 50/60Hz, 0.18A, Output DC 5.5V , 1.0A; Main unit: DC 5.5V , 1.0A ChargePAK Pure ChargePAK B1 rechargeable battery pack (available separately) Power consumption Standby: 0.8W, Active: 1.7W Dimensions 115 mm wide x 180 mm high x 120 mm deep Approvals CE marked.
Installing the ChargePAK B1 Note: Switch Evoke off and disconnect from the mains power supply before installing ChargePAK B1. 5.5V DC Note: If you are charging ChargePAK for the first time or after an extended period of inactivity it is recommended that it is charged for around 24 hours to ensure full battery power.
Changing Evoke’s removable covers Note: Switch Evoke off and disconnect from the mains power supply before changing the removable covers. 5.5V DC...
Page 21
Should you have a problem with your unit please contact your supplier or contact Pure Support at http://support.pure.com.
Page 23
Pure UK Headquarters Pure Australasia Pty Ltd Imagination Technologies Limited PO Box 5049 Home Park Estate Wonga Park Kings Langley Victoria 3115 Herts, WD4 8LZ Australia United Kingdom sales.au@pure.com www.pure.com http://support.pure.com/au http://support.pure.com...
Need help?
Do you have a question about the Evoke D2 Mio and is the answer not in the manual?
Questions and answers