Using The Smart Card Reader - VeriFone VX 520 GPRS CTLS Installation Manual

Using the Smart
Card Reader
To conduct a smart
card transaction
CAUTION
The smart card transaction procedure may vary from one application to another.
Verify the procedure with your application provider before performing a smart card
transaction.
1
Position a smart card with the contacts facing upward (see
2
Insert the smart card into the smart card reader slot in a smooth, continuous
motion until it seats firmly.
3
Remove the card only when the application indicates the transaction is
complete.
Figure 18 Inserting a Smart Card
Leave the smart card in the card reader until the transaction is complete.
Premature card removal will invalidate the transaction.

Using the Smart Card Reader

Figure
VX 520 GPRS CTLS I
NSTALLATION
T S
ERMINAL ETUP
18).
29
G
UIDE