VeriFone VX 520 GPRS CTLS Installation Manual page 20

T S
ERMINAL ETUP
Installing a Paper Roll in the Printer
To install a paper roll
20
VX 520 GPRS CTLS I
1
Hook your finger under the latch and lift up to swing the paper roll cover open
(see Figure 7).
Figure 7 Opening the Printer Cover
2
Remove any partial roll of paper in the printer tray by lifting it up.
3
Loosen the glued leading edge of the new paper roll or remove the protective
strip. Unwind the paper roll past any glue residue.
4
Hold the roll so the paper feeds from the bottom of the roll.
5
Drop the paper roll into the printer tray.
Figure 8 Loading Paper Roll
6
Pull paper up past the glue residue.
G
NSTALLATION UIDE