D-Link DAP-1620 Quick Install Manual page 7

Hide thumbs Also See for DAP-1620:

Table of Contents

Available languages

Configure the DAP-1620

Using a Web Browser

You may log into the web-based configuration utility on the DAP-1620 to perform

the following tasks:

• Upgrade firmware

• Change wireless and network settings

• Change the login password

Plug the DAP-1620 in an available outlet near your router. You may move it

to a more suitable location after configuration.

Open the wireless utility on your wireless device or computer. Select the

Wi-Fi Network name (from the Wi-Fi Configuration Card) and enter the

password. You may also connect the DAP-1620 to your router or computer

using an Ethernet cable.

Open a web browser (e.g., Internet Explorer, Firefox, Safari, or Chrome)

and enter http://dlinkap.local./. You may also enter the IP address of the

DAP-1620.

DAP-1620 Install Guide

Wi-Fi Name(SSID) 2.4Ghz:

dlink-xxxx

Wi-Fi Name(SSID) 5GHz:

dlink-xxxx-5GHz

Password: xxxxxxxx

To con gure your extender, go to:

http://dlinkap.local.

Or http://192.168.0.50

Username: "Admin"

Password:" " (leave the eld blank)

Table of Contents