Contents 1 Important Safety 2 Your multiroom speaker Introduction What's in the box Overview of the main unit 3 Prepare Connect power and turn on 4 Play Play in single mode Play in group mode Control play 5 Other features Update firmware Reset group status 6 Product information...
1 Important Safety • Make sure that there is enough free space around the product for ventilation. • Only use attachments or accessories specified by the manufacturer. • Use only power supplies listed in the user manual. • This speaker is designed to be waterproof in compliance with IPX4.
2 Your multiroom speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With the splash proof Philips izzylink speaker with a built-in battery, you can: •...
Overview of the main unit d e fg h a GROUP button/indicator • Start, pause, or resume play. • Press and hold to group with another izzylink-compatible multiroom speaker. f Volume indicator • Press to exit or return to a group. •...
h AUDIO IN button/indicator • Switch to the Audio In source. • Lights up white in Audio In mode. i GROUP RESET • Press with a sharp object to restore factory defaults. j SOFTWARE UPGRADE socket • USB socket for speaker software upgrade only.
• the wall power socket. If you contact Philips, you will be asked for the » The volume indicator lights up. model and serial number of this apparatus. The » The signal strength indicators flash model number and serial number are on the for several seconds until the speaker bottom of the apparatus.
• In group mode, press on any speaker in the group to switch all the speakers on from standby mode. Note • You can hold to turn off the volume indicator completely. • In single mode, if the Bluetooth connection is invalid or music playback is stopped for 15 minutes, the speaker switches to standby mode automatically.
Bluetooth device is approximately 10 meters (30 feet). Bluetooth and search for Bluetooth devices (refer to the user manual of the device). When [Philips BM6 XXX] is displayed on your device, select it to start pairing and connection. If necessary, enter the default password “0000”.
• After successful Bluetooth connection, play music on the Bluetooth device. » Music streams from your Bluetooth device to the speaker. To disconnect the Bluetooth-enabled device: • Disable Bluetooth on your device; • Press and hold on the speaker for more than three seconds;...
Note Note • • You can create a group of up to five speakers, with one You can only add slave speakers one by one. Each time as the master and four as slaves. when you add a slave speaker, first press and hold GROUP on the master speaker until the indicator on the button flashes and the speaker beeps.
B Press GROUP on a slave to switch to single mode. » The GROUP indicator on the speaker turns off, and the indicator flashes blue. Press GROUP again to rejoin a group. • » The GROUP indicator lights up again and the indicator turns off.
Reset group status • In case of any grouping issues, you can Unzip and save the upgrade file (BM6.bin) reset the speaker with a sharp object such to the root directory of a USB stick. as a needle. Disconnect the AC power of the speaker.
6 Product General information information AC power Input: 100-240 V~ PHILIPS 50/60 Hz Switching power supply Output: 10 V model: GME24A- 2.4A 100240FXR Note Operation Power 1.8 W • Product information is subject to change without prior Consumption notice. Eco Standby Power <...
The device does not support the (www.philips.com/support). When you contact Bluetooth profiles required for this speaker. Philips, make sure that the device is nearby • The Bluetooth function of the device is and the model number and serial number are not enabled.
8 Understand (2) Status of Meaning streaming quality meanings of indicators All three indicators The signal strength of LED status lighting up group connection is excellent. Two indicators The signal strength of lighting up group connection is good. Only one indicator The signal strength lighting up of group connection...
(4) Bluetooth Meaning indicator status The speaker is powered off. The speaker acts as a slave in group mode. The speaker is grouping with its master/slave. Flashing blue The speaker is in pairing mode. Solid blue The speaker is connected to a Bluetooth-enabled device.
Directive 1999/5/EC. You can find the Environmental information Declaration of Conformity on www.p4c.philips. All unnecessary packaging has been omitted. com. We have tried to make the packaging easy to...
Open Source Team, Gibson Innovations Limited, 5/F Philips Electronics Building, 5 Science Park East Avenue, Hong Kong Science Park, Shatin, N.T. Hong Kong.
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.