Control Play - Philips BM6 User Manual

• Press any source key on a slave speaker to
change it to be the master of the group.
» Pair your mobile device with the new
master if you have not paired with it
before.
Switch to single mode
A Press GROUP on the master to enter
single mode.
» The slaves keep looking for the master
until timeout in 15 minutes.
» You can create a new group with the
slaves or press GROUP on a slave to
enter single mode.
• Press GROUP on the master again to
resume group mode.
B Press GROUP on a slave to switch to
single mode.
» The GROUP indicator on the speaker
turns off, and the
blue.
Press GROUP again to rejoin a group.
•
» The GROUP indicator lights up again
and the indicator turns off.

Control play

Note
•
Due to data buffering, you may experience some
delay when you play/pause or adjust volume from the
Bluetooth device.
Control from the speaker
• In single mode, turn the speaker
on/off.
• In group mode, turn the whole
group of speakers on/off.
• In single mode, pause/resume play
of the current speaker.
• In group mode, pause/resume play
of the whole group.
+/-
• Turn clockwise/anticlockwise to
increase/decrease volume of the
current speaker.
Control from the connected Bluetooth device
You can use controls on your Bluetooth device
directly.
indicator flashes
EN 11