Download Print this page

Fine Digital FineDrive 400 Quick Start Manual

Finedigital finedrive 400: quick start

Hide thumbs Also See for FineDrive 400:

Hardware Installation

2.1 Install the vehicle

suction mount.

2.4 Slide Finedrive 400

into vehicle suction

mount.

Quick-Start Guide

GPS

Antenna

DC12V

Cigarette

Lighter Adapter

2.2 Install GPS antenna

in port on the back of the

unit. Make sure that the

letters "GPS" on antenna

are facing the up.

FineDrive 400

Stylus Pen

Map Data

SD Card

2.3 Connect the car

power adapter to the

Finedrive 400.

2.5 Turn power on

and the Finedrive 400

is ready to go.

Table of Contents

Do you have a question about the FineDrive 400 and is the answer not in the manual?

Page 1: Hardware Installation
What’s in the Box? Finedrive 400 Vehicle Suction Holder Hardware Installation 2.1 Install the vehicle suction mount. 2.4 Slide Finedrive 400 into vehicle suction mount. Quick-Start Guide Antenna DC12V Cigarette Lighter Adapter 2.2 Install GPS antenna in port on the back of the unit.
Page 2 By Address 3-1. Read the warning screen, then select 3-4. Select 3-7. Input the house number and then select 3-2. The map screen appears. Press menu button on the navigation front plate. 3-5.Select 3-8. Use to scroll up and down. Select the desired street by touching on the screen.
Page 3 By Favorite In order to use this feature, you must have at least one address previously stored in your unit. 4-1. Read the warning screen, and then select 4-4. Select By Recent Destination In order to use this feature, you must have had created a route at least once before. 5-1.
Page 4 By POI (Nearest Point of Interest) Only the Attraction category is shown on this quick guide. Screen shots and steps may vary among categories. 6-1. Read the warning screen, and then select 6-4. Select 6-7. Use to scroll up and down. Select the desired destination by touching on the screen.