System Memory - Asus H1 10M-A Manual

Hide thumbs Also See for H1 10M-A:

Table of Contents

1.4

System memory

1.4.1

Overview

This motherboard comes with two Double Data Rate 4 (DDR4) Dual Inline Memory Module

(DIMM) sockets. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module.

DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.

According to Intel

CPU.

H110M-A

H110M-A 288-pin DDR4 DIMM sockets

1.4.2

Memory configurations

You may install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR4 DIMMs into the

DIMM sockets. You can refer to the recommended memory population below.

•

You may install varying memory sizes in Channel A and Channel B. The system

maps the total size of the lower-sized channel for the dual-channel configuration. Any

excess memory from the higher-sized channel is then mapped for single-channel

operation.

•

Due to the memory address limitation on 32-bit Windows

or more memory on the motherboard, the actual usable memory for the OS can be

about 3GB or less. For effective use of memory, we recommend that you do any of the

following:

ASUS H110M-A

CPU spec, DIMM voltage below 1.35 V is recommended to protect the

Use a maximum of 3 GB system memory if you are using a 32-bit Windows

I nstall a 64-bit Windows

motherboard.

F or more details, refer to the Microsoft

com/kb/929605/en-us.

OS if you want to install 4GB or more on the

support site at http://support.microsoft.

OS, when you install 4GB

OS.

1-7

Table of Contents