Brother MFC-J460DW Quick Setup Manual page 2

9
Print from a computer
Put the CD-ROM into your CD/DVD drive.
• If you do not have a CD/DVD drive, download the software:
For Windows : solutions.brother.com/windows
®
For Macintosh: solutions.brother.com/mac
When the device installation screen appears, follow the
on-screen instructions.
When you reach Connection Type, select the
connection type you want.
If you select Local Connection (USB), DO NOT
connect the USB cable until instructed.
Follow the on-screen instructions to continue
installation.
Continue to follow the on-screen instructions. When
Installation Complete appears, your Brother
machine is successfully installed. Click Finish.
If wireless connection is not successful, connect
your machine manually using the control panel,
following the instructions below in
Using the Wireless Setup Wizard
Using the Wireless Setup Wizard
Use Brother's Wireless Setup Wizard to manually connect your Brother machine to your wireless network. Your computer, smartphone, or mobile device must be connected to the same wireless network if you
want to print wirelessly.
1.
Turn off your wireless access
point/router, wait 10 seconds,
and then turn it on again.
4.
Press a or b to select the Network Name
2
(SSID) you found in . Press OK.
SSID of access point
Brother Solutions Center: http://support.brother.com
• If the Brother screen does not appear automatically, click
Computer (My Computer).
(For Windows
go to Computer (This PC).)
Double-click the CD/DVD-ROM icon, and then double-click start.exe.
If you selected Wireless Network Connection (Wi-Fi):
When the Wireless Device Setup screen appears,
select Setup without a USB cable (Recommended).
Print from a smartphone or other mobile device
Print from and scan to smartphones and other mobile devices using our free application
Brother iPrint&Scan.
.
Download and install Brother iPrint&Scan at
You can also use AirPrint, a mobile printing solution that lets you wirelessly print photos, emails, web pages, and documents
from your iPad, iPhone and iPod touch without the need to install a driver. For more information about using AirPrint, see the
AirPrint Guide on your model's Manuals page.
Your smartphone or mobile device must be connected to the Brother machine wirelessly. Connect your smartphone or mobile
device to a wireless access point/router, and connect your Brother machine to the same wireless access point/router, using the
Wireless Setup Wizard. See
2.
Find your SSID (Network Name) and Network Key (Password) on your wireless access
point/router and write them in the table provided below.
If you cannot find this information, ask your network administrator or wireless access
point/router manufacturer.
SSID (Network Name)
Network Key (Password)
SSID: XXXXXXX
Network key: XXXX
5.
Enter the Network Key (Password) you found
2
in using the dial pad, and then press OK.
Network Key
ABC_
8: click the File Explorer icon on the taskbar, and then
®
solutions.brother.com/ips
Using the Wireless Setup Wizard
6.
When wireless setup is successful, the LCD displays
[Connected]. Press OK, and then return to step
driver.
If the machine does not connect to the network, verify your Network
Key (Password) and repeat these steps.
For additional help, see your model's FAQs & Troubleshooting
page on the Brother Solutions Center at
(Start) > • If the User Account Control
screen appears, click Yes to
continue installation.
• To install the machine on
additional computers, repeat
this procedure for each
computer.
If you selected Local Connection (USB):
Wait until the on-screen instructions tell you to connect
to your computer: lift the scanner cover, insert your
cable into the jack indicated below, and guide the cable
out the back of the machine. Close the scanner cover,
and then connect the cable to your computer.
or
.
3.
Press b to display the wireless settings
menu, and then press a or b to select
[Setup Wizard]. Press OK.
http://support.brother.com
© 2015 Brother Industries, Ltd. All rights reserved.
LEW787001-00
to install the
9