Panasonic DMC-TZ70 Operating Instructions For Advanced Features page 225

Wi-Fi/NFC
■
Sending a picture each time one is recorded ([Send Images While
Recording])
Select [New Connection] in the [Wi-Fi] menu, and press
[MENU/SET]
Use cursor button to select [Send Images While Recording]
and press [MENU/SET]
Use cursor button to select [PC] and press [MENU/SET]
Select [Via Network] or [Direct] to connect
Select the PC you want to connect to
• If the PC you want to connect to is not displayed, select [Manual Input], then enter
the computer name (for Mac, enter the NetBIOS name).
Select the folder you want to send to
• When the connection is established, the confirmation screen for the transmission
setting is displayed. Check the setting and press [MENU/SET]. To change the
send setting, press the [DISP.] button.
Take still pictures
• To change the setting or disconnect, press [Wi-Fi] button.
You cannot change the settings while sending still pictures. Wait until sending is
complete.
(→61)
- 225 -
(→249)
(→258)
(→190)
Sending pictures to a PC
SQW0206