Options While On Calls - AT&T EL52265 Quick Start Manual

options while on calls

Volume control
While on a call, press
the listening volume.
note: The handset volume setting and speakerphone volume setting are independent. Changing
one does not affect the other.
Join a call in progress
If a handset is already on a call and you would like to join the call, press
To exit the call, press
charger. The call does not end until all handsets hang up.
notes:
• This feature is only applicable to models with more than one handset.
• For models with two to four handsets, all handsets can be used at the same time on an outside
call. For models with five handsets, you can use a maximum of four handsets. If the fifth
handset attempts to join the call, the handset screen shows unable to call.
Chain dialing
While on a call, you can initiate a dialing sequence from numbers stored in the directory,
caller ID log or redial list. Doing this can be useful if you wish to access other numbers
(such as bank account numbers or access codes).
To initiate a dialing sequence from the directory, caller ID log or redial list while on a
call, access the number through the menu system:
1. While on a call, press
Press
- or -
While on a call, press
2. Scroll to the desired number. If you are in directory, you can use the dialing keys to
find the desired directory entry (see search by name in the online user's manual for
more details).
3. Press
redial
Each handset stores the 10 most recently called numbers in the redial list.
1. To review and call numbers in the redial list, press
most recently called number appears on the screen.
2. To view up to 10 recently called numbers, press
repeatedly to scroll through the numbers in the list.
3. When the desired number appears, press
the number.
or
.
to dial the displayed number.
to increase or press
on another system handset.
or place the handset in the telephone base or
, then scroll to Directory or Caller ID log.
to show the redial list.
12
in idle mode. The
or
,
or
to decrease
to dial