Table of Contents
Advertisement
2
Press 3/4 to select the setting and then press [MENU/SET].
Settings
[‡]
([Auto])
[
]
([iAuto])
[
] ([Auto/Red-Eye])
[‰]
([Forced Flash On])
([Slow Sync./
[
]
Red-Eye])
[Œ]
([Forced Flash Off])
¢1 This can be set only when Intelligent Auto Mode is set.
The icon changes depending on the type of subject and brightness.
¢2 The flash is activated twice. The subject should not move until the second flash is
activated.
[Red-Eye Removal]
flash icon.
The flash is automatically activated when the recording
conditions make it necessary.
¢1
The flash is automatically activated when the recording
conditions make it necessary.
It is activated once before the actual recording to reduce the
red-eye phenomenon (eyes of the subject appearing red in
¢2
the picture) and then activated again for the actual
recording.
•
Use this when you take pictures of people in low
lighting conditions.
The flash is activated every time regardless of the recording
conditions.
•
Use this when your subject is back-lit or under
fluorescent light.
If you take a picture with a dark background landscape, this
feature will slow the shutter speed when the flash is
activated so that the dark background will become bright.
¢2
Simultaneously, it reduces the red-eye phenomenon.
•
Use this when you take pictures of people in front of a
dark background.
The flash is not activated in any recording conditions.
•
Use this when you take pictures in places where the
use of flash is not permitted.
(P103)
on the [Rec] menu is set to [ON], [
Recording
Description of settings
- 63 -
] appears on the
Advertisement
Table of Contents
