Philips HTS5520 Service Manual page 30

Mechanical and Dismantling Instructions
Dismantling Instruction
Step5: Dismantling Loader, disconnect the 3 connectors (XP12, XP13, XP14) aiming in the below figure, and remove 1 screws
that connects the loader and the bottom cabinet. (Figure 5)
Dismantling the Turn Knob assembly, invert the Assy Front Panel and remove 2 screws on Encoder board, then take it apart. (Figure 6)
Step6: Dismantling Main Board, first disconnect 4 connectors (XP1, XP8, XP10, XP11), and then remove 7 screws. (Figure 7 )
Step7: Dismantling Power Board, disconnect the connectors XS703 and CON501 then remove 4 screws. (Figure 7 )
Step8: Dismantling Amplifier Board, remove 4 screws from the PCB. (Figure 7)
Figure 5
3-3
Detailed information please refer to the model set.
Figure 6
Figure 7