Table of Contents
Advertisement
OM-CP-RFCURRENT2000A
Product Overview
The OM-CP-RFC1000-EXT, a high powered transceiver that has a substantially long transmission range,
providing enhanced performance in occluded environments (ovens, refrigerators, etc.). The OM-CP-RFC1000-
EXT also features an external antenna, allowing more flexibility with mounting positions in both orientation
and proximity to metal walls. The device may be used as a repeater, or directly plugged into the Windows PC.
Transmission Distance
The OM-CP-RFC1000-EXT transmits to other OM-CP-RFC1000-EXTs up to 4000 feet maximum typical
outdoors/line of sight, 1000 feet maximum typical indoors/urban. The OM-CP-RFC1000-EXT transmits to data
loggers up to 2000 feet maximum typical outdoors/line of sight, 500 feet maximum typical indoors/urban.
The OM-CP-RFC1000-EXT can connect to a maximum of 64 data loggers. The OM-CP-RFC1000-EXT transmits
on a frequency of 2.405GHz - 2.475 GHz.
Operating Environment
The OM-CP-RFC1000-EXT is rated for use in an environment with temperatures from -20 °C to 85 °C and a
humidity range of 0% to 95% RH non-condensing. The OM-CP-RFC1000-EXT is rated IP40 and is protected
against solids that are greater than 1mm in size. This device is not water resistant.
LEDs
The red LED indicates that the device has power. The green LED will blink when communicating with other
Omega devices.
Installation Guide
1. Locate the Autorun.exe file on the Omega Software Flash Drive.
2. Select "Omega Software" in the Omega Installer Options window panel.
3. If the Windows PC doesn't already have .NET 4.0 Framework, installation may be required.
Note: To see if the .NET 4.0 Framework is installed, go to the Windows Control Panel and select Programs.
"Microsoft .NET Framework 4.0" would be listed as a Windows program.
4. Select "Install Omega Software" if .NET framework is installed on the Windows PC, or if installing on a
Windows 8 machine.
Installing the Omega Data Logger Software
Insert the Omega Software Flash Drive into an open USB port on a Windows PC.
If the autorun does not appear, locate the drive on the computer and double
click on Autorun.exe. Follow the instructions provided in the Installation Wizard.
Software can also be downloaded from the Omega website.
Advertisement
Table of Contents
