Panasonic dmp-bdt280 Owner's Manual page 27

System
∫ Easy Settings
You can execute basic settings.
∫ Display Settings
Press [OK] to show the following settings:
TV Aspect
Set to match the type of TV connected.
When connected to a 4:3 aspect TV and playing
16:9 ratio image:
The sides are cut
off so the picture
4:3 Pan &
fills the screen.
Scan
When playing
BD-Video, video is output as "4:3
Letterbox".
Black bands
4:3
appear at the top
Letterbox
and bottom of the
picture.
When connected to a 16:9 widescreen TV and
playing 4:3 ratio image:
Video is displayed as a 4:3 ratio
16:9
image in the center of the screen.
Video is displayed as a
16:9 Full
horizontally stretched 16:9 image.
Screen Saver Function
This is to prevent image retention on the
screen.
≥ When this is set to "On":
If a list of playback content is displayed and
there is no operation for 10 minutes or more,
the screen switches to HOME menu
automatically.
≥ While playing and pausing, etc., this function
is not available.
Status Messages
Choose whether to show status messages
automatically.
Settings
HDMI CEC
Set to use "HDMI CEC" function when
connected to a device that supports "HDMI
CEC".
≥ Select "Off" when you do not want to use
"HDMI CEC".
∫ Start-up Banner
Select whether to display the banner after turning
on this unit. ( 15)
∫ Quick Start
Speed of start-up from standby mode is
increased.
≥ When set to "On", the internal control unit will be
powered and the idle power consumption will
increase so compared to when set to "Off".
(Power consumption
∫ Remote Control Code
Change the remote control code if other
Panasonic products react to this remote control.
∫ Firmware Update (
Press [OK] to show the following settings:
Automatic Update Check
When this equipment remains connected to the
Internet, it will check for the latest firmware
version when it is turned on and you can update
it if necessary.
Update Now
You can update the firmware manually if a
firmware update is available.
∫ System Information
Press [OK] to show the following settings:
License
Information about the software used by this unit
is displayed.
Firmware Version Information
Display firmware version of this unit and
wireless LAN module.
∫ Restore Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, on-screen language, etc.
- 27 -
32)
13)