Dmx Channels - Beamz 151.287 Instruction Manual

DMX CHANNELS

6 Channels
Channel
CH1
CH2
CH3
CH4
CH5
CH6
C. MANUAL RGBW MODE
Switch the unit on and press the MENU button until "rXXX" is displayed you are in Red dimming mode. Press the UP
and DOWN buttons to adjust intensity of the RED LEDs and confirm setting by pressing the ENTER button. When
"gXXX" is displayed you are in Green dimming mode, "bXXX" is Blue mode, "uXXX" is White mode.
D. AUTO/SOUND MODE
Auto Mode: There are 3 types of Auto Modes to choose from;
- Instant (PXXX)
- Smooth (LXXX)
- Fade (EXXX)
The running speed is adjustable in all 3 modes (000-255).
E. AUTO/SOUND MODE
Press mode key until Iron or IroF is displayed; then press Up or Down
button to choose Iron. Press ENTER to lock
To switch off the lights:
Press OFF on the remote control. This will turn off all the lights until the
button ON is pressed again [1].
Manual Color Control
You can set R/G/B/W colours with the remote by pushing either the Red
<R> button for red, the Green <G> button for green, the Blue <B> button for
blue or the White <W> button for white [3].
Each colour intensity is then adjustable using the Light Up and Down [2]
buttons
Preset colour mode:
Press one of the twelve preset colours on the remote control. [4]
With the RGBW buttons and Brightness up/down buttons colours can be
separately dimmed. No dimming possible with fixed colours
AUTO/SOUND on the IRC.
Press one of the four program buttons to choose between the different auto
programs. [5]
Function Value
Master Dimming 000-255
LED Red 000-255
LED Green 000-255
LED Blue 000-255
000-050
051-100
Auto / Sound
101-150
Mode
151-200
201-255
000-003
004-255
Function
Dimming 0-100%
No function
Auto 1 Instant
Auto 2 Fade smooth
Auto 3 Fade in/out
Sound mode
No function
Strobe / Speed