Related Manuals for ACTi TCM-3411
Summary of Contents for ACTi TCM-3411
- Page 1 TCM-3401/3411 H.264 Megapixel IP Dome Camera H.264 Megapixel IP Day & Night Dome Camera Hardware User’s Manual (DC 12V / PoE) Ver. 2010/1/5...
-
Page 2: Table Of Contents
Wall Mount ................... 15 Basic Connections ................18 Product Specification ..............19 Accessing Camera If you have DHCP server / router in your network: ...... 20 If you do NOT have DHCP server / router in your network: ..20 www.acti.com... - Page 3 Operation of this equipment in a residential area is likely to cause harmful interference in which case the users will be required to correct the interference at their own expense. www.acti.com...
-
Page 4: Introduction
TCM-3401/3411 Hardware User’s Manual 1. Introduction Package Contents TCM-3401/3411 Power Adaptor (Optional) Product CD Accessories Warranty Card Drill Template Drill template www.acti.com... -
Page 5: Features And Benefits
Software Development Kit Support This IP Camera can be integrated or controlled by applications from third party software developers. Software developers can save considerable efforts by using our Streaming Library or ActiveX control. Please contact us for details on integration support. www.acti.com... - Page 6 The “Digital Time Code Embedded” function records video time in the video stream. Therefore, each image frame is marked with its original recording time. It is very useful when users want to find the video at an exact time or between a certain time intervals. www.acti.com...
-
Page 7: Safety Instructions
Adjust only those controls that are covered by the instruction manual, as an improper adjustment of other controls may result in damage, and will often require extensive work by a qualified technician to restore the video product to its normal operation. www.acti.com... - Page 8 TCM-3401/3411 Hardware User’s Manual Safety Check Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine if the video product is in proper operating condition. www.acti.com...
-
Page 9: Physical Description
(10Base-T/100Base-TX Ethernet). 2) Power Input Connect the power adaptor here if your power input is DC12V. NAME DESCRIPTION DC Power Input Ground Pin 3) Reset Button Step 1: Switch off IP device by disconnecting the power cable www.acti.com... - Page 10 Pushing down the tab above will reveal a small slot for you to insert the end of wire. Release the tab and the wire will be fastened by the internal spring. The connection pins are as shown in this image: www.acti.com...
- Page 11 DC (to the parallel with the load, for protection against transistor) transient voltages. Connect to GND to activate, or leave floating (or Must not be (Digital unconnected) to deactivate. exposed to Input) voltages greater than 30V DC. www.acti.com...
-
Page 12: Installation Procedure
TCM-3401/3411 Hardware User’s Manual Installation Procedure Ceiling Mount Use the drill template, and drill a hole with φ 35 on the ceiling Tighten the plate to ceiling with M4*20 screws www.acti.com... - Page 13 TCM-3401/3411 Hardware User’s Manual Connect cables through the hole on the ceiling and plate, or on the side of casing Fasten the camera to ceiling by turning clockwise direction www.acti.com...
- Page 14 TCM-3401/3411 Hardware User’s Manual Insert the cables (Power/Network/DIO/Audio) through the mounting plate and connect to the camera. Then use the little strap in bundled accessory to fasten the network cable. 1.6.1.6 Done www.acti.com...
-
Page 15: Wall Mount
Tighten wall mount bracket to the wall by 3 PAN Head Tapping screws 3-PAN HEAD SCREW TAPPING Tighten the plate to wall mount bracket with M4*10 screws, and connect all necessary cables through the hole on the plate and wall mount kit 2-FLAT HEAD SCREW TAPPING(M4x10 www.acti.com... - Page 16 Note: that there’s a triangle mark on both plate and wall mount kit. Those triangle marks need to be fixed to the same direction. Insert the cables (power/Network/audio) through the mounting plate and connect to the camera. Then use the little strap in bundled accessory to fasten the network cable. www.acti.com...
- Page 17 TCM-3401/3411 Hardware User’s Manual Fasten the camera to wall mount kit by turning clockwise direction Done www.acti.com...
-
Page 18: Basic Connections
1) Connect the power adaptor to IP Camera 2) Connect IP device’s Ethernet port to Network switch (via RJ45 connectors). 3) Connect a PC to the Ethernet switch (via RJ45 connectors) Please refer our PoE Guide for more details on Power over Ethernet related concepts. www.acti.com... -
Page 19: Product Specification
TCM-3401/3411 Hardware User’s Manual Product Specification TCM-3401 TCM-3411 Device Micron Progressive Scan CMOS Image Size 1/3 inch Effective Pixels 1280(H) x 1024 (V) Color mode automatically switched to Color 0.5 Lux at F1.0 (2400 °K, 30 IRE) B/W mode under 4 Lux Min. -
Page 20: Accessing Camera
IP Camera into the network and your IP device will acquire network address by itself. Find and access the device with our IP Utility program. You may download it at: http://www.acti.com/product/detail/Software/ACTi_Utility_Suite If you do NOT have DHCP server / router in your network: 1. - Page 21 IP address in the same network.) 4. Open Internet Explorer (Version 6.0 or above) , and type in the Default IP: 192.168.0.100 5. When you see the login window, please input default user and pasc sword: Default User: Admin Password: 123456 www.acti.com...
- Page 22 9. Change the IP mode to Static. 10. Change the IP to 192.168.0.101 or any other unused IPs. Do NOT use the PC’s IP address or 192.168.0.100.). If this is not the first device you add to the network, please also avoid other devices’ IPs. www.acti.com...
- Page 23 13. Wait for 30 seconds, and open IE again to connect to the IP. (In this example, 192.168.0.101). For the second device or more you add into the network, please type the correct IP. 14. Adjust the default Video setting by going to Video & Audio -> Media 1 www.acti.com...
- Page 24 TCM-3401/3411 Hardware User’s Manual www.acti.com...
Need help?
Do you have a question about the TCM-3411 and is the answer not in the manual?
Questions and answers