Set The Check Size; Change The Paper Size - Brother DCP-L2500D Basic User's Manual

5
Make sure the paper is below the
maximum paper mark (b b b).
Overfilling the paper tray will cause
paper jams.
6
Slowly push the paper tray completely
into the machine.
7
Lift the support flap to prevent paper
from sliding off the output tray.
8
Send your print job to the machine.
Change your print preferences in the Print
dialog box before sending the print job
from your computer.

Set the Check Size

Your Brother machine's Check Size setting
causes the machine to display a message
when you remove the paper tray from the
machine, asking if you changed the paper
size.
The default setting is On.
1
Press Menu.
2
Press a or b to display the [General
Setup] option, and then press OK.
3
Press a or b to display the [Paper]
option, and then press OK.
4
Press a or b to display the [Check
Size] option, and then press OK.
5
Press a or b to select the [On] or
[Off] option, and then press OK.
6
Press Stop/Exit.

Change the Paper Size

When you change the size of the paper you
load in the tray, you must change the paper
size setting on the LCD at the same time.
1
Press Menu.
2
Press a or b to display the [General
Setup] option, and then press OK.
3
Press a or b to display the [Paper]
option, and then press OK.
4
Press a or b to display the [Paper
Size] option, and then press OK.
12