Configuring Wireless Network - D-Link DIR-615 Quick Installation Manual

DIR-615

Configuring Wireless Network

By default, the wireless network of the router is open (it requires no password
to access it). To avoid unauthorized access to your wireless local area network,
change the default settings of the router.
Example of Wireless Settings
1. Go to the Wi-Fi / Security settings page.
2. Select the WPA2-PSK value from the Network Authentication drop-
down list.
3. Enter a key (a password that will be used to access your wireless
network) in the Encryption Key PSK field. Use digits and Latin
characters.
4. Select the AES value from the WPA Encryption drop-down list.
5. Click the Change button.
If you perform initial configuration of the router via Wi-Fi connection,
!
note that immediately after changing the wireless default settings you
will need to reconfigure the wireless connection using the newly
specified settings.
Quick Installation Guide
27