Configuring Wireless Network - D-Link DIR-825/AC Quick Installation Manual

DIR-825/AC

Configuring Wireless Network

By default, the wireless network of the router is open (it requires no password
to access it). To avoid unauthorized access to your wireless local area network,
change the default settings of the router.
Example of Wireless Settings
1. Go to the Wi-Fi / Security settings section.
2. Go to the page corresponding to the used range of the wireless network
(Wi-Fi / Security settings / 2.4 GHz or Wi-Fi / Security settings /
5 GHz).
3. Select the WPA2-PSK value from the Network Authentication drop-
down list.
4. Enter a key (a password that will be used to access your wireless
network) in the Encryption Key PSK field. Use digits and Latin
characters.
5. Select the AES value from the WPA Encryption drop-down list.
6. Click the Apply button.
7. If needed, specify your own security settings for the other range of the
wireless network.
If you perform initial configuration of the router via Wi-Fi connection,
!
note that immediately after changing the wireless default settings you
will need to reconfigure the wireless connection using the newly
specified settings.
Quick Installation Guide
35