LG WF-95T Service Manual page 54

10) Spin extraction is not proceeded.
Where, what & how to check?
Motor
1. In the case that the wash motor
does not spin during spin extraction;
1) Check there is motor working
sound,or
2) If there is no motor-working
sound;
Check frequency of the
Ball Pressure Sensor, under
no load, or
Is placed the magnetic in
Lid-B.
Check resistance of the motor.
Drain Motor/Clutch
1. In the case the motor rotates but the
inner tub does not rotates;
1) Check resistance of the drain
motor if the drain motor doesn't
work,or
2) Check gap between the PV link
and the brake lever if the inner
tub does not rotates while the
drain motor works.
Result of Check Possible Cause How to repair & settle
There is motor Defect of the
capacitor or
working sound.
Mechanically
locked.
Less than Defect of the
Ball Pressure
26.3
Sensor.
The lid is open.
Mistake in use.
Defect of magnetic in
LID-B
Contact defect
of the Ball
Pressure Sensor
Coil is open.
Resistance is
Coil is open.
normal
Defect of
connection part
or defect of the
controller.
The clearance is
Assembling defect
less than 2.0mm
of the drain motor
or more then
or the clutch
3.5mm
The gap is
Defect of the
normal .
clutch.
(2.0~3.5mm)
54
Change the capacitor
after checking defect of
capacitor.
check whether the
washing clutch or the
washing tub is blocked
if the motor rotates after
removing the V-belt.
Check whether the
motor is locked if the
motor does not rotates
even though the V-belt
being removed.
Change the Ball
Pressure Sensor.
Explain" The lid is close
during operation"
Change the Lid-B
Change the Ball
Pressure Sensor.
Change the motor.
Change the drain motor.
Change the controller
after checking
connection parts.
Reassemble the drain
motor or the clutch to
keep the clearance.
Change the clutch.