Epson EX7230 Pro User Manual page 150

Power light Status light
Off Flashing blue
Off Flashing blue
Off Flashing blue
Off Flashing blue
Light status Light status
varies varies
Flashing blue Flashing blue
rapidly rapidly
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Projector Setup Settings - Extended Menu
Where to Get Help
Projector Environmental Specifications
Lamp light Temp light
Off Flashing
orange
Flashing Off
orange
Flashing Flashing
orange orange
Orange Orange
Flashing Flashing
orange rapidly orange rapidly
Flashing Flashing
orange rapidly orange rapidly
150
Status and solution
A fan or sensor has a problem.
Turn the projector off, unplug it, and
contact Epson for help.
Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
Auto iris error. Turn the projector
off, unplug it, and contact Epson for
help.
Power error. Turn the projector off,
unplug it, and contact Epson for
help.
When transferring settings between
projectors, the settings file may be
corrupt or the USB flash drive or
USB cable may not be properly
connected. Remove the flash drive
or cable, unplug the power cord,
and try again.
When transferring settings between
projectors, writing may have failed
and a projector error may have
occurred. Turn the projector off,
unplug it, and contact Epson for
help.