Table of Contents
Advertisement
Setting
Input Signal
Video Signal
Aspect
Overscan
Note: The Noise Reduction setting is not available if you have done the following:
• Selected a digital RGB input signal
• Selected an interlaced (480i/576i/1080i) or composite video input signal and set the Progressive
setting to Off
Parent topic:
Adjusting the Menu Settings
Related references
Available Image Aspect Ratios
Options
Auto
RGB
Component
Auto
Various video standards
See the list of available aspect
ratios
Auto
Off
4%
8%
121
Description
Specifies the signal type from
input sources connected to
computer ports
Auto: detects signals
automatically
RGB: corrects color for
computer/RGB video inputs
Component: corrects color for
component video inputs
Specifies the signal type from the
input sources connected to the
video ports
Auto: detects signals
automatically
Sets the aspect ratio (width-to-
height ratio) for the selected input
source
Changes the projected image
ratio to make the edges visible by
a selectable percentage or
automatically
Advertisement
Table of Contents
