Table of Contents
Advertisement
setup screen
` appearing (Disappearing)
1. Set the analysis type to <appearing
(Disappearing)>.
2. Select the desired event rule:
• Defined Area Based Rules : It detects
event of appearing object that
appears in the area and remaining
for a certain time period while not
passing through the area borders,
and opposite case of disappearing of
objects existed in the area.
On the screen, click four vertices to
define detection area.
Select the <appearing(Disappearing)> from the popup.
• Entire Area Based Rules : If there is
new object in the full area for a while
or an object that was in the full area
disappears, it will be detected.
Click on the <entire area based
rules> menu to select a rule in the
pop up window.
3. Click [oK].
4. To remove a defined rule, right click on
the displayed side lines of the area or
on the screen to open popup context
menu and select [Delete] button.
98_ setup screen
Advertisement
Table of Contents
