Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Aurora Multimedia ASP12H
Summary of Contents for Aurora Multimedia ASP12H
- Page 1 ASP-12H 1x2 HDMI 1.3 Distribution Amplifier User Manual Manual Number: 110701...
- Page 2 Safety and Notice The ASP-12H 1x2 HDMI 1.3 Distribution Amplifier with EDID Manager has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the ASP-12H should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
- Page 3 Introduction The ASP-12H 1x2 HDMI 1.3 Distribution Amplifier with EDID Manager provides the most robust, cost effective and advanced HDMI 1.3 splitter solution in the market, by which the high definition video and high quality audio can be transmitted to 2 different locations without losing quality. With automatic EDID learning, the ASP-12H will effectively avoid HDMI compatibility issues and offer the best HDMI support for HDMI splitters.
- Page 4 Specifications & Package Contents Model Name ASP-12H Technical Role of usage 1x2 Distribution Amplifier (Splitter) HDMI compliance HDMI 1.3c [Deep Color, xvYCC color space supported] DVI compliance DVI 1.1 HDCP compliance Video bandwidth Single-link 340MHz [10.2Gbps] Video support Up to WUXGA [1920x1200@60Hz] & UXGA [1600x1200@60Hz] DTS-HD Master Audio, Dolby TrueHD Audio support Dolby Digital, DTS, DVD-Audio, LPCM, SACD, MPCM...
- Page 5 Panel Descriptions Front/Rear Panel 1. HDMI IN: HDMI input source 2. HDMI OUT: distributed HDMI outputs 3. Power: LED light means power is on 5. +5V DC power jack: connect to 5V power supply unit When the connected HDMI monitor is verified as HDMI and HDCP compliant, the corresponding LED will blink.
- Page 6 Hardware Installation Broadcasts HDMI signal to 2 HDMI displays! 1. Switch off all devices, including monitors. 2. Connect to the receivers. 3. Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI In. 4. Plug in 5V DC power supply unit. 5.
- Page 7 Notice 1. While connecting a new monitor to the splitter, experiencing a short period of time no display may be expected. Automatic EDID learning will analyze the newly connected monitor to see if the EDID for the HDMI input is necessary to update! 2.
- Page 8 Limited 3 Year Warranty Aurora Multimedia Corp. (“Manufacturer”) warrants that this product is free of defects in both materials and workmanship for a period of 3 years as defined herein for parts and labor from date of purchase. Motorized mechanical parts (Hard Drives, DVD, etc), mechanical parts (buttons, doors, etc), remotes and cables are covered for a period of 1 year.
Need help?
Do you have a question about the ASP12H and is the answer not in the manual?
Questions and answers