Calling Via The Computer Using The Headset - Sennheiser SD series User Manual

Making calls using the headset

Calling via the computer using the headset

If you want to use the headset to accept, make or end calls, you have to
establish a wireless link between headset and base station. You can choose
between manual and automatic link establishment (see "Auto Link" on
page 16):
Switch position Function
Manual link establishment
When taking the headset out of the base station,
you have to manually establish the wireless link
between headset and base station.
Automatic link establishment – Auto Link
When taking the headset out of the base station,
a wireless link is automatically established between
headset and base station.
Managing calls without using
Accepting a call: The softphone signals that you are receiving a call. You
hear a ring tone in the headset.
Click on "Accept call" on your softphone.
Making a call:
Press the Link button on the headset to establish a link between base
station and headset. If the "Auto Audio" function is activated, this step
is not necessary (see page 19).
Start the call using your softphone.
Ending a call:
End the call using your softphone.
the "HeadSetup" call control functionality
SD Series - User Guide | 25