Table of Contents
Advertisement
Brakes
1.
Pull the rubber dust cover ( ) back.
2.
Loosen the lock nut ( ).
3.
To position the brake lever farther away
from the handgrip, turn the adjuster ( )
clockwise.
To position the brake lever closer to the
handgrip, turn the adjuster counterclockwise.
4.
Tighten the lock nut. Return the dust cover
to its normal position.
5.
Apply the brake, release it, then spin the
wheel and check that it rotates freely. Repeat
this procedure several times.
86
Servicing Your Honda
2
3
4
6.
Check freeplay by pulling in slowly on the
front brake lever until the brake starts to
engage.
Freeplay:
3/8 13/16 in (10 20 mm)
−
If brake lever freeplay is not within this
range, see your Honda dealer.
−
Hide quick links:
Advertisement
Table of Contents
