D/n wdr 700tvl fast dome camera d/n wdr 700tvl fast dome ip camera d/n human tracking fast dome camera (72 pages)
Summary of Contents for Lilin SP9264
Page 1
D/N WDR 700TVL FAST DOME CAMERA SP9264/9268 N/P & SP9364/9368 N/P D/N WDR 700TVL FAST DOME IP CAMERA IPS9264/9268 N/P & IPS9364/9368 N/P D/N HUMAN TRACKING FAST DOME CAMERA ST9264/9268 N/P & ST9364/9368 N/P INSTRUCTION MANUAL...
CONTENTS Pages Preface Features Warnings & Cautions Structural Element Fast Dome Camera Set Up Alarm Out Mode Switch Setting RS-485 Protocol Switch Setting Fast Dome ID Address Setting Refer Chart Fast Dome Connection Jack and Cable Requirement Installation Indoor Installation Structural Drawing Embedded Mounting (False Ceiling) Attached Mounting (Fixed Ceiling) Wall Mounting (Fixed Bracket)
Page 3
Display the Camera Setting Menu Auto Focus Setting Zoom Speed Setting Focus Speed Setting Auto Iris Setting Advanced Setting Shutter/AGC Setting White Balance Setting HLC (High Light Compensation) Setting Day/Night Setting Night Environment Setting Synchronization Mode Setting Image Setting Pan/Tilt Setting Menu Display the Pan/Tilt Setting Menu Home Position Setting Self Return Time Setting...
Fast Dome series are fully-functional and user-friendly. It will meet your need for a wide range of surveillance applications. The application for LILIN tracking dome are (1) Access control area (Bank Chest, Military Magazine, Oil or Chemical tank...). (2) After hour monitoring area (Warehouse, Archives, Parking exit...).
FEATURES 26X Auto Focus Lens Build-in 26X optical zoom lens with focal length 3.2~83.2mm 36X Auto Focus Lens Build-in 36X optical zoom lens with focal length 3.3~119mm 700 Horizontal TV lines Automatic / Manual Iris Control Preset ID / Name Preset Background Environment File Private Mask 360°...
Page 6
Human Tracking Fast Dome Camera Function:(ST926X/936X) 1. Human Tracking Fast Dome Camera series are smart sensor and built-in intelligent video processing which has surveillance applications on, (1) Moving object detection. (2) Tracking and zooming moving object. 2. Human Tracking Fast Dome Camera series have two modes: (1) Manual tracking mode (Keyboard mode).
WARNINGS & CAUTIONS Please read the manual before attempting installation or operation 1. Please be aware to the warnings and cautions notice. 2. Don't use any chemical detergent to clean the machine surface, use a damp cotton cloth only. Regularly clean the dome cover to assure proper focus ability. 3.
STRUCTURAL ELEMENT Dome Cover RS-485 In/Out Terminal Camera Case Video Out Jack Bottom Chassis Alarm In/Out connector Power In Jack (AC100 ~ 240V) RJ45 Network Connector [IPS926X/936X] Power In Jack (AC24V)
FAST DOME CAMERA SET UP DIP Switch Setting Camera ID Switch RS-485 Protocol Switch Alarm Out Mode Switch Remark: Black icon of the DIP Switch bump. Alarm Out Mode Switch Setting Alarm Out Mode can be set as NC (normally close) or NO (normally open) RS-485 Protocol Switch Setting Explanation of DIP Switch Setting : 1.
Page 10
position of a fast dome camera. Please refer to MERIT LILIN PROTOCOL2 (MLP2) for detail of command format. RS-485 Protocol DIP Switch of LILIN D/N WDR 700TVL Fast Dome (IP) Camera / D/N Human Tracking Fast Dome Camera Series Setting...
Therefore each dome is addressing by ID switch located at the base of the Fast Dome. Remark: Black icon of the DIP Switch bump. When select MLP1 (MERIT LILIN PROTOCOL 1), Camera ID setting as followings: 1 2 3 4 5...
Page 12
When select MLP2 (MERIT LILIN PROTOCOL 2), Camera ID setting as followings:...
Fast Dome Connection Jack and Cable Requirement AC100~240V Power Cable AC24V Power Cable RS-485 Twisted Pair Cable To Keyboard or Matrix . ..etc. Video Signal Cable To Monitor Alarm In/Out Cable To PIR CAT5 Network Cable 1. AC100 ~ 240V Power Cable 2.
Page 16
b. Prepare the individual conductors for clamping. After clamping the contacts, push them into the proper holes in the accessory connector of this camera until they snap in place. Contact CAUTIONS : CONNECT THIS TO 24V AC CLASS 2 POWER SUPPLY ONLY. 3.
Embedded Mounting (False Ceiling) Step 1 Ceiling Preparation Drill a 3/32" (2.4mm) hole at the center of the Use a pencil and a compasses to mark a circle 6.7" chosen area. (170mm) in diameter and cut the circle. Step 2 The Ceiling Ring 204mm 93mm Attach the ring to...
Page 19
Step 4 Attach the Camera Body and Base Attach camera body to Turn camera body Tighten the two screws base counter clockwise to to fix the camera body Notice: tight position position connector is correct or not. Step 5 The Fix Ring Put on the three L shape Attach fix ring with Tighten the three black...
Turn the ring clockwise Attach dome cover to Turn the dome cover to tight position camera body clockwise to tight position Note : After dome cover is attached, use glass-cleaning cloth to clean dome cover. Unclean dome cover may affect camera performance. Attached Mounting (Fixed Ceiling) Step 1 Fix The Base Turn the dome cover...
Page 21
Step 2 Camera Setting Setting Fast Dome ID, Alarm Out Mode, RS-485 Protocol Step 3 Attach the Camera Body and Base Attach camera body to Turn camera body Tighten the two screws base counter clockwise to to fix the camera body Notice: tight position position connector is...
Wall Mounting (Fixed Bracket) Step 1 Fix The Bracket Fix bracket first, and Turn the dome cover Separate the dome Untighten the two pull control cable and counter clockwise cover from camera screws from base power cable from bracket cable outlet. Turn the camera cover Separate the camera Set all of control...
Page 23
Step 4 Camera Setting Setting Fast Dome ID, Alarm Out Mode, RS-485 Protocol Step 5 Attach the Camera Body and Base Attach camera body to Turn camera body Tighten the two screws base counter clockwise to to fix the camera body Notice: tight position position connector is...
SYSTEM CONFIGURATION LILIN's integrated Fast Dome Surveillance System is suitable for a wide range of surveillance applications. The system can be as single fast dome with one keyboard or encompassing as 64 domes with comprehensive matrix switching, PC control and even Digital Video Recording.
Page 25
Multiple Domes means that more than one fast dome is linked in the system. Each dome connects to next dome forming a serial linking. Each dome has an individual ID dip switch, which allows the keyboard to identify each fast dome and make command. Sometimes it is more convenient to wire a Ⅲ...
Fast Dome, Matrix and Keyboard Matrix System is designed to process multiple video systems and video switching. Its central process unit (CPU) can manage multiple video signals simultaneously and control other Ⅲ linking system, such as fast dome or PIH-820 telemetry receiver.
9600 bps). The PC control port RS-232 is converted to RS-485 format by interface. User may use their own software (protocol) or software provided by LILIN to control the dome. In this system up to 64 fast domes can be linked.
Fast Dome, DVR and Keyboard The DVR System is an advanced digital recording product, with long recording time and easy searching features. Telemetry remote control is twisted pair for data transmission to the fast dome. Fast Dome can be controlled directly from the control panel of the DVR, or from keyboard. Each DVR (Digital Video Recorder) can manage 16 video signals and via RS-485 ot daisy connection 16 sets of fast dome camera.
Fast Dome IP Camera with PC Control The Fast Dome IP Camera can be connected via RJ-45 Ethernet cable that provides both Internet and/ or Intranet access. Multiple Fast Dome IP Cameras can be connected with in a Hub or multiple Hubs. Please consult your network administrator for network architecture and software settings.
OPERATION Initial Power Up Inspection After the power is first applied to a dome it will perform a self-test procedure. This calibrates and checks the basic functions of the dome, control is not possible during this self-test period. Once the camera has stopped moving, it will then be ready to control. If preset positions and tours have been programmed into a dome and the power is turned off, the dome will enter the Auto Scan mode once the power is turned on again (after self-test period).
Fast Dome Selection To call out a dome controlling or setting To select 1st Fast Dome LENS ICR C.ESC ALARM MATRIX WIPER SPRAY LIGHT RESET Push key followed by key. C.SET 。 SEARCH PRESET CTRL1 CTRL2 To select 64th Fast Dome AUTO Push key ...
Iris Control The purpose of iris control is to adjust brightness on target. It can be set as Auto Iris or Manual Iris. 1. Iris Open Push key, to open the iris and brighten the picture. LENS ICR C.ESC ALARM MATRIX WIPER SPRAY...
Page 33
Joystick Control Move the Joystick to bring the camera to the desired view position. Adjusting Lens ZOOM IN / OUT, FOCUS NEAR / FAR / AUTO and IRIS O / C / AUTO keys. When set up preset point, using manual focus will LENS ...
Recalling Preset Positions Once the required preset positions have been stored in a dome, they may be quickly recalled, returning the dome to exact position. To recall 1st Preset Position: Push key followed by key. PRESET 。...
Activating Auto Pan When the Auto Pan function is activated, the fast dome will auto touring the preset groups entered. To activate Auto Pan: ALARM LENS ICR C.ESC AUTO MATRIX Push key, confirming the activation of autopan. WIPER SPRAY LIGHT RESET C.SET...
Alarm Management The 6 alarm inputs of each fast dome are corresponding with the first 6 preset positions. When 。 an alarm signal is triggered, the dome will go to the relevant position at 360 /sec. Make sure the first 6 preset positions are set to desired alarm areas. Alarm input can be set to NC (normally close) or NO (normally open) depends on alarm detector.
SETUP MENU TREE SETUP LANGUAGE ENGLISH MENU DISPLAY PRESET ID SETUP ZOOM RATIO ALARM MESSAGE TIME DATE/TIME DATE DATE FORMAT PAN/TILT ANGLE AUTO PAN AREA TITLE DOME CAMERA AUTO FOCUS AUTO SETTINGS ONE PUSH ZOOM SPEED FOCUS SPEED AUTO IRIS LEVEL HIGH LUM.
Page 38
PAN/TILT HOME POSITION SELF RETURN TIME SELF RETURN MODE AUTO EDIT POSITION AUTO MODE DWELL TIME PRESETS PRESET NUMBER SCAN SPEED PRESET MAP PATROL LEARN EDIT POSITION CLEAR EDIT ID SCENE FILES EXPOSURE MODE DWELL TIME WHITE BALANCE SPEED CLR PRESET TOURS NUMBER EDIT TOUR...
Press key on the keyboard to recall Setup Menu. CTRL1 Press key to exit setup menu or push joystick down to select <EXIT>, and then press key to exit setup menu. C.SET CTRL1 MERIT LILIN FAST DOME NOTE ENGLISH LANGUAGE Enter Exit Buttons Description <DISPLAY SETUP>...
2. Camera, Pan/Tilt, Receiver version 3. Font of OSD version 4. Protocol rate and format 5. Fast dome ID number 6. Protocol version, LILIN717 (LILIN MLP1), LILIN MLP2 Display Character Setup Menu 1. Display Character Setup Menu Press key into Setup Menu.
Page 41
3. Zoom Ratio Setting Push joystick down to select <ZOOM RATIO>, and then push joystick left or right to make selection: OFF : No Zoom Ratio on the monitor screen. ON : Zoom Ratio on the monitor screen. 5~30 sec : Display elapsed time. Zoom Ratio will have been displayed on the monitor screen ...
Page 42
(3) Date Format Setting Push joystick down to select <DATE FORMAT>, and then push joystick left or right to adjust format of date. yy / mm / dd → mm / dd / yy → dd / mm / yy 6.
Page 43
USER AREA AREA NUMBER <EDIT POSITION> <EDIT TITLE> ABOVE NUM CLR AREA BACK EXIT 1. Push joystick down to select <AREA NUMBER>, and then push joystick left or right to select area number. (1~6) 2. Push joystick down to select <EDIT POSITION>, and then press key into Area C.SET CTRL1 Position setting.
(3) Modify Area title Push joystick down to select [EDIT AREA] on the area title setting, and push joystick right to select modifiable characters. Push joystick down to select new characters, and press key to chose. C.SET CTRL1 (4) Cancel Area Title ...
Camera Setting Menu Display 1. Display the Camera Setting Menu After getting in dome setting menu, push joystick down to select <CAMERA>, and then press key into camera setting menu. C.SET CTRL1 CAMERA AUTO AUTO FOCUS ZOOM SPEED MID. FOCUS SPEED AUTO IRIS LEVEL <ADVANCED SETTING>...
ADVANCED SETTING AUTO SETUP SHUTTER/AGC <MANUAL> HIGH LUM. MODE SHUT WHITE BAL <ATW> BRIGHTNESS <HLC> LOW LUM. MODE DAY/NIGHT AUTO GAIN 25dB NIGHT ENV. NORMAL SHUT ---- SYNC BRIGHTNESS x0.50 <IMAGE> BACK EXIT BACK EXIT (1) SHUTTER/AGC Setting Push joystick down to select <SHUTTER/AGC>, and then push joystick left or right ...
Page 47
BRIGHTNESS: Push joystick down to select <BRIGHTNESS>, and then push joystick left or right to adjust brightness level of darker part. x0.25 → x0.50 → x0.75 → x1.00 1-3. BLC Setting: When “AUTO” is selected, the brightness gain is automatically controlled for backlight compensation in response to the light intensity detection window.
2-2. WDR+SHUT Mode: This mode can set a fixed WDR and shutter speed with iris to exhibit image effect. Push joystick down to select <SHUT>, and then MANUAL SETUP push joystick left or right to make selection. MODE WDR+SHUT 1/53 1/53(63) →...
Page 49
1-3. ATW FRAME: Push joystick down to select <ATW FRAME>, and then push joystick left or right to make selection. X0.5 → X1.0 → X1.5 → X2.0 1-4. ENVIRONMENT: Push joystick down to select <ENVIRONMENT>, and then push joystick left or right to select INDOOR mode or OUTDOOR mode.
5. ANTICR: This mode suppresses the color rolling which arises when there are slight deviations between blinking frequency of non-inverter fluorescent lights and the drive frequency of the image sensor devices. Note: Color rolling suppression (HIGH LUM. MODE = SHUT). ...
DAY/NIGHT SCHEDULE DAY→NIGHT 18:00 NIGHT→DAY 06:00 BACK EXIT Push joystick down to select <NIGHT→DAY>, and then press key into time C.SET CTRL1 setting. Push joystick left or right to select time of NIGHT→DAY. Then press C.SET CTRL1 key again to next item. 06 : 00 → ...
Page 52
ADVANCED SETTING IMAGE-1 SHUTTER/AGC <MANUAL> DIGITAL EFFECT WHITE BAL <ATW> CONTRAST <HLC> SHARPNESS DAY/NIGHT AUTO NIGHT ENV. NORMAL R-GAIN SYNC B-GAIN <IMAGE> <NEXT> BACK EXIT BACK EXIT 1. DIGITAL EFFECT: The flip function enables the analogue output’s image to flip from top/bottom, left/ right or to spin 180°.
IMAGE-1 IMAGE-2 DIGITAL EFFECT 3D-NR CONTRAST E-ZOOM SHARPNESS R-GAIN B-GAIN <NEXT> BACK EXIT BACK EXIT 7. 3D-NR (3D Noise Reduction): Push joystick down to select <3D-NR>, and then push joystick left or right to select “ON”...
3. Self Return Time Setting Push joystick down to select <SELF RETURN TIME>, and then push joystick left or right to select return time: OFF → 3sec → 4sec → .... → 9sec → 10sec → 20sec → 30sec → 40sec → 50sec 60min ←...
6. Auto Scan Mode Setting Push joystick down to select <SELF RET. MODE> or <AUTO MODE>, and then push joystick left or right to select <AUTO>, then press key into auto scan mode setting. C.SET CTRL1 AUTO SCAN <EDIT POSITION> DWELL TIME 5 Sec SCAN SPEED...
PATROL LEARN MEMORY 100 PERCENT (2) Clear Memory of Patrol Push joystick down to select <CLEAR>, and then press key to clear all memory of C.SET CTRL1 patrol. Preset Function Setting Menu 1. Display the Preset Setting Menu After getting in dome setting menu, push joystick down to select <PRESETS>, and then press ...
Page 57
3. Preset Position Setting C.SET Push joystick down to select <EDIT POSITION>, and then press key into preset position CTRL1 setting. FOCUS Push joystick left, right, up, or down to start position, and then press , , , , FOCUS NEAR ...
Page 58
(5) Preset ID Position Setting Push joystick down to <POSI>, and then press key to get in. C.SET CTRL1 C.SET Push joystick to move preset ID to needful position of frame, and then push key to CTRL1 confirm. (6) Return Preset Menu ...
Tour Function Setting Menu 1. Display the Tour Setting Menu After getting in dome setting menu, push joystick down to select <TOURS>, and then press key into tours setting menu. C.SET CTRL1 2. Tour Number Selection TOURS Push joystick down to select <NUMBER>, and then push NUMBER joystick left or right to select Tour1 or 2.
Privacy Zones Setting Menu 1. Display the Privacy Zones Setting Menu After getting in dome setting menu, push joystick down to select <PRIVACY ZONES>, and then press key into privacy zones setting menu. C.SET CTRL1 PRIVACY ZONES NUMBER MODE <EDIT ZONE> CLEAR BACK EXIT...
Alarms Setting Menu 1. Display the Alarms Setting Menu After getting in dome setting menu, push joystick down to select <ALARMS>, and then press key into alarms setting. C.SET CTRL1 ALARMS POSI 1 POSI 2 POSI 3 POSI 4 POSI 5 POSI 6 IN MODE...
4. Alarm Output Control Setting Push joystick down to select <OUT>, and then push joystick left or right to select alarm output mode: OFF → IN 1 → IN 2 → IN 3 → IN 4 → IN 5 → IN 6 → ANY OFF: NO action.
Page 63
Push joystick down to select <OK>, and then press key to confirm and back to password C.SET CTRL1 C.SET function menu, or push joystick down to select <CANCEL>, and then press key to cancel CTRL1 password. These numbers of Edit column will be reset to "1111". Note: When edit password setting and camera recording function are simultaneously performed, ...
Restore Factory Defaults 1. Display the Restore Function Initialization Menu After getting in dome setting menu, push joystick down to select <FACTORY INITIAL>, and then press key into factory initial setting. C.SET CTRL1 RESTORE FACTORY DEFAULTS RESTORE BACK EXIT 2. Factory Initial for All Push joystick down to select <RESTORE>, and then push joystick left or right to select <ALL>.
Press key into setup menu. C.SET CTRL1 Push joystick down to select <SCHEDULE SETUP>, and then press key into schedule C.SET CTRL1 setting. MERIT LILIN FAST DOME SCHEDULE SETUP ENGLISH LANGUAGE <ALARM IN> <DISPLAY SETUP> <STARTUP AUTO OPTIONS> <DOME SETTINGS>...
4. End Time Setting C.SET Push joystick down to select <END>, and then press key into time setting. Then push CTRL1 joystick left or right to select end time and press key for next item. C.SET CTRL1 08 : 00 → → 08 : 00 → → 08 : 00 C.SET C.SET CTRL1...
Example: 1. 12:00, perform SEQ. Mode 2. 13:00, STOP (If "self return mode" is home, "home position setting" is 1, and "self return time" is 10 min, camera will be performed "self return mode" function and recall preset position 1 by 13:10.) 3.
APPENDIX A Quick Reference Table Function Operation To Tilt Up Push Joystick Forward To Tilt Down Push Joystick Down Pan / Tilt Control To Pan Left Push Joystick Left Push Joystick Right To Pan Right Dome Selection Numeric Key + CAM Zoom In ZOOM IN Zoom Out...
APPENDIX B Trouble Shooting 1. No Power 1-1. Check power input connection 1-2. Check connection between camera body and upper base (AC24V Model) 2. No Video 2-1. Check camera video output on camera 2-2. Check cable (damaged cable) 2-3. Check video input connection on monitor 2-4.
PELCO OPERATION RS-485 Protocol Setting and DIP SWITCH Selection RS-485 Terminal Resistance Setting (PELCO D/P for parallel system) In parallel system, MUST turn the resistance of the first and last terminal to ON position, and the resistance of nodes in-between to OFF position. This will insure the transmission interface in best condition.
Page 73
PELCO D Camera ID Switch Setting DIP SWITCH CAMERA ID 1 CAMERA ID 2 CAMERA ID 3 CAMERA ID 4 CAMERA ID 5 CAMERA ID 253 CAMERA ID 254 PELCO P Camera ID Switch Setting DIP SWITCH CAMERA ID 1 CAMERA ID 2 CAMERA ID 3 CAMERA ID 4...
Page 74
Move the joystick “up” and “down” to selection function. Move the joystick “right” and “left” to change the settings. Push [IRIS OPEN] in menu homepage to store the setting changes or continue to another page. Push [IRIS CLOSE] in menu homepage to leave the settings. 8. Other settings please refer to LILIN instruction manual.
Page 75
PELCO D/P FUNCTION TABLE Operation Function Keyboard PELCO D Set or Recall Preset Position (1~32) Number + PRESET PELCO P Set or Recall Preset Position (1~32/ 41~90/ 106~128) Number + PRESET 180° Horizontal Instant Flip Number 3 3 + PRESET Return Home Position Number 3 4 + PRESET Perform Auto Scan mode (SCAN)