Others - Panasonic DMR-BWT820 Operating Instructions Manual

Remote device list
• To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select "Yes", then press [OK].
• To deregister equipment
1 Select the registered equipment,
then press [OK].
2 Select "Yes", then press [OK].
• This function cannot be enabled when
"Automatic" is selected in "Registration type for
remote devices". ( 90)
• The maximum number of equipment that can be
registered is 16.

Others

Standby Settings
Power Save in Standby
• On:
It will go into the "Power Save in Standby"
mode.
• On Timer:
"Power Save in Standby" is activated when
the set time comes.
• If the clock has not been set, "Power Save
in Standby" is activated at all hours.
• Off:
It is possible to start quickly from standby
mode. (Quick Start mode)
• This function cannot be enabled when the DLNA
function is enabled in "Home Network function".
( 90)
• The setting may be changed to "Off" automatically
when the setting for video communication is changed.
( 75)
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
• When "REWIND LIVE TV" is set to "On"
( 83), "Off" cannot be selected.
Automatic Standby after OTR
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing "Automatic Stop" or
"Recording Time" (
Convenient functions
28).
91
VQT4C68