3.3.2 Printer Function (Calibration/setup)
1. Select the PC interface connected with bar code printer.
2. Click the "Function" button to setting.
3. The detail functions in the Printer Function Group are listed as below.
Note:
For more information about Diagnostic Tool, please refer to the diagnostic utility quick start guide in the
CD disk \ Utilities directory.
Function
Calibrate Sensor
Ethernet Setup
RTC Time
Print Test Page
Reset Printer
Factory Default
Dump Text
Ignore AUTO.BAS
Configuration Page
Description
Calibrate the sensor specified in the Printer Setup
group media sensor field
Setup the IP address, subnet mask, gateway for
the on board Ethernet (Please refer to next
section)
Synchronize printer Real Time Clock with PC
Print a test page
Reboot printer
Initialize the printer and restore the settings to
factory default.
To activate the printer dump mode.
Ignore the downloaded AUTO.BAS program
Print printer configuration
13