Loading Media In Cutter Mode (Optional) - AMT Datasouth Fastmark M1/203dpi User Manual

3.2.4 Loading Media in Cutter Mode (Optional)

1. Refer to section 3.2.1 to load the media.
2. Lead the media through the cutter paper opening.
3. Close the top cover gently.
4. Use "Diagnostic Tool" to set the media sensor type and calibrate the selected sensor. (Start
the "Diagnostic tool"  Select the "Printer Configuration" tab  Click the "Calibrate Sensor"
button)
Note:
Please calibrate the gap/black mark sensor when changing media.
Cutter paper opening
11